Solarez Zerovoc Styrofoam safe UV cure resin, UV Resin, UV Resin manufacturer, UV Resin Supplier, Wholesaler, Wholesale,


Compatible with EPS and Polyurethane.	Exellent bond for strength and flexibality.	Reuse of uncured "waste" resin.

3-MINUTE UV CURE EPOXY COATING OF EPS BLANKS. Imagine shaping your EPS blank in the morning and surfing it before noon. Now imagine doing that with a resin that is eco-friendly and incredibly tough. The new resin, ZEROVOC is exactly what the name implies, Zero VOCs (vapors). It is a one-part system with no toxic or flammable vapors or hardeners that can cause allergies to glassers. The insurgence of so many EPS blanks in recent years has prompted the need for a clean, fast method to glass a strong, light board. ZEROVOC is it. Wahoo!

	Video takes about 20 seconds to load click here to watch on you tube







ZERO Volatile Organic Compounds NO ALLERGIC REACTIONS

Zerovoc UV Resin is an EPS/Styrofoam Sealer compatible with polyester resin.
Use Zerovoc UV Epoxy resin instead of spackle/putty and you will save a step and time. Spackle takes about 24 hours to dry,
Zerovoc cures in minutes. Also you will be creating a very important bond between the resin and the surfboard blank that will have
a flexible "tooth" that will help the surfboard from delaminating without loosing flexible strength.
What Zerovoc you do not use can be saved because it is not catalyzed. (The catalyst is the UV rays).
Once you have established a protective
coating you may add additional layers of, "any" resin, including polyester or vinyl ester, All are compatible.

Vinyl Ester is recommended for the best bond.

From the makers of Lifesled® and Bullyboard® Solarez® is a registered trademark of Wahoo® International Inc.