| Surfboard |
| |
|
| |
|
| rail |  |
| | 1) | Remove debris. |
| | 2) | Fill ding with Solarez. |
| | 3) | Cover with a sheet of clear platic.
Stretch the four corners to shape.
Expose to sunlight for 3 mins. |
| | 4) | Peel off plastic sheet. Sand edges. |
| |
|
| |
|
| nose |  |
| | 1) | With masking tape, create a reservoir to desired shape. |
| | 2) | Fill reservoir with Solarez.
Expose to sunlight for 5 mins. |
| | 3) | Shape with sandpaper. |
| |
|
| |
|
| fin |  |
| | 1) | Sand fin base and hull foundation on each side of fin (60 grit, 1/2" wide). |
| | 2) | Tilt fin to 45° angle. Apply a thick bead of Solarez to sanded areas (do one fin side at a time).
Expose to sunlight for 3 mins. |
| | 3) | Sand bead to form a fillet. Repeat steps to other side of fin. |
| |
|
| |
|
| tail |  |
| | 1) | After removing debris, create a dam with some masking tape. |
| | 2) | Fill the dam with Solarez.
Expose to sunlight for 3 mins. |
| | 3-4) | Flat-sand vertical and horizontal to create hard edge. |
