How to Fiberglass Your Surfboard Using Solarez UV Cure Resin
Wahoo International®, is a leading Manufacturer of UV resin, Solarez® Polyester, Epoxy, Vinyl Ester, Zerovoc Resins.
fiberglass preperation
fiberglass with uv cure resin
apply solarez logos
surfboard fin box
 install surfboard fin box with solarez uv cure resin
Preperation
Fiberglass
Apply logos
Router fin box
Install fin box
UV resin
uv cure resin
uv resin
solarez uv cure resin
uv resin
uv resin fiberglassing
fade
  
uv resin cure
solarez media
uv resin surfboard repair
uv resin
Contact Gary Fisher at Wahoo international
Switch to Solarez® UV cure resin. Use the sunlight instead of toxic MEKP catalyst.
-----------------------------------------------------------------------Solarez is the future.
It's fast, easy and economical. You can glass a board in about 1 to 2 hours! It saturates the fiberglass quickly and
cure time is extremely rapid. Solarez sands better because it cures harder and the board comes out light and strong.
Also there is no unnecessary waste.
Video takes about 20 seconds to load
 Click here to watch all 5 parts on YouTube

Solarez® makes glassing easy! No longer will you have to rush when laminating.
Just take your time, get it right, then carry outside to the UV rays. Save the resin in your bucket, it can be reused!
Switching to Solarez® UV resin can reduce problematic environmental and health impacts during the glassing process.

Using Solarez® UV cure Resin is simple you do not need to add MEKP catalyst.
Just continue to glass your board as you do now. Simply place your board out in the sun, it can be a cold or cloudy day.
Within minutes your board will be cured and ready for sanding.
Solarez® UV Resin offers the following advantages:
• Reduction of Volatile Organic Compound (VOC) emissions resulting in decreased air pollution.
• Reduction in worker exposure to hazardous emissions.
• Does not require MEKP.
• UV resin is not temperature dependent for curing.
• Speeds up the curing processes and reduces production time.
• Reduces resin waste. Some manufacturers have gone from 80 boards per drum of resin to 120 boards per
--drum of resin using UV curing resins.
• Resin can be captured and reused at another time.
• Reduces damages from hardened resin in work areas most noticeably work floors.
• Resin will not cure on tools, thereby reducing cleaning costs.
* If you are using UV cure resins you may not need to have an air permit.
*Check with your local Air Quality Management District, they can exempt you from permitting requirements upon inspection.
Solarez® UV Resin is specifically designed and chemically formulated for the surfboard manufacturing industry.
Using Solarez® offers exceptional advantages over competitors who use traditional room temperature curing hardeners such as MEKP. Comparable in cost, many of the world's top surfboard manufacturers have realized that UV curing is the next step in surfboard materials technology.
Solarez® UV Resin offers not only better performance and quality, but massive increases in productivity and cost savings.
From the makers of Lifesled® and Bullyboard®. Solarez® is a registered trademark of Wahoo® International Inc.
.
.