Polyester Ding Repair
$5.60 – $14.90
NOW AVAILABLE IN AIR TRAVEL SAFE FORMULA
SOLAREZ repair putty is a mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 30 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- Proprietary formula assures that millions of fiberglass fibers are thoroughly wet-out and evenly dispersed in every dose.
- Bubble-free mixture
- Denser cross-linking and surface cure
- No residual peroxides
- UV Stable
- Comes with 60/240 grit sand pad.
Additional information
| Resin Type | Polyester Air Travel Safe Non-Hazmat, Polyester |
|---|---|
| Size | .5oz, 1oz, 2oz |
Reviews (6)
6 reviews for Polyester Ding Repair
You must be logged in to post a review.
Videos For Polyester Ding Repair
WARNING: This product can expose you to chemicals including STYRENE MONOMER, which is known to the State of California to cause cancer. For more information visit: https://www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto puede exponerle a qímicos incluyendo STYRENE MONOMER, que es conocido por el Estado de California como causante de cáncer. Para mayor información, visite: https://www.P65Warnings.ca.gov.
Anonymous –
Great product and so easy to use.
Anonymous –
Always very satisfied with the results.
Anonymous –
Always a great product.
Anonymous –
Works as described and is good to have on hand, especially when my friends and I get caught up in a log jamb at a crowded break…plenty of Solarez to go around!
Melisa Laura Aieta –
Within the commercial resins, so far this is the best record we tried !
S Shallard –
I have made one minor repair to my wakeboard. I had looked at multiple videos on line but when it came to making the repair there is a learning curve and some details not provided in the videos. I am still unsure what type of plastic is suitable for forming the surface, I initially tried using some peel ply. It turned out it was too stiff to form to the surface. I sanded it back down, applied more resin, and then used a poly bag from to the curved surface. This worked much better although I did get some overfill flowing onto the adjacent undamaged surface. Repair links like it will be functional even if not all that pretty. I am sure once you do a couple the end result will be more predictable. Just hoping that the tube will not harden now that it has been opened. I did not see any tips related to opened tubes and anticipated shelf life or storage tips.